Level 10 Problem

[ah137]

I am having problems with my level 10, it will cycle fine when I keep the shots per second low, but as soon a I try to actually fire normal rof, the bolt will only cycle half way every thrid or so shot.

Thanks Hills

I have tried to change springs, shims and carriers.

wtf

micro- emag two shims .5 ring(one with just a dot) cut spring crossfire tank 800-850

[Havoc_online]

what's your input? and what are you level 10 settings? what type of valve?

[TRIAD]

I had a similar problem when I first installed my level 10. I was getting "shootdown" so to speak. All I did was take apart the valve, and UBER-oil it. Then, I put it back together, and it worked fine. I don't know WHY it worked, just that it did. So, give that a try.

[ah137]

I have oiled it after ever time I reassemble it so like 7 times not helpin

Thanks though Hills

[ah137]

help please?

Do I need to go down a spring size and go up a carrier size?

Later Hills

[Dayspring]

Sounds like some bolt stick. Go to the biggest carrier that doesn't leak.

Tuna showed me a trick this past weekend. The carrier w/ Oring should be able to dangle the bolt if you hold it by the carrier, but it should have a little sway to it, not REALLY tight.