Will an RT Pro Valve fit???

[xprod77]

Sorry if this is a redundant question that has been asked over and over again(maybe I did the search incorrectly)... but will an RT Pro valve "fit" in a standard powerfeed mag???

[Havoc_online]

it will fit, you might run into issues with the on/off pin and trigger rod lengths though(can't think right now).

[GT]

i just put a RT Pro valve in my regular mag body. I will let you know how it turns out this weekend. If you look in the parts section AGD sells the on/offs by themselves so if it shoots funny I will try that.

jB

[GT]

nevermind we should be fine the rt pro and retro use the same on/off pin of .750

[Havoc_online]

newer RTP on/off pins are .765

[xprod77]

Originally posted by Havoc_online
newer RTP on/off pins are .765

So then it won't work.. or it won't work "good"??

[Havoc_online]

you might have to adjust your trigger rod length to get the proper spacing(last resort). Why put an RTP valve in your powerfeed mag? just get a Retro valve that'll slip right in, it'll work perfect and perform the same as an RTP.

[xprod77]

Well I already have an RT Pro that I was going to sell but no one is offering so I figured I could keep the valve, put it in my powerfeed mag, and part out the rest. $$$ is obviously an issue or else I would buy a retro valve. Thanks,

-X-

[GT]

Originally posted by Havoc_online
newer RTP on/off pins are .765

please check the link here and tell me what it says

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=132&CATID=6

still says .75 does't it.

I did the same thing you did traded my rt pro body for a regular mag body and keept the valve.

jB

[Havoc_online]

lol so what's your point? I said some of the newer pins are .765 . Both pins will work, but AGD made longer ones to help control reactiveness(longer the pin, the less reactive). Now that I think about it, you should be fine just by slipping the RTP valve in no matter which pin you have as long as you havent messed with the trigger rod length.

[razamatraz]

It should work, but I was under the impression that to put an Retro valve or RTP valve in a standard mag you had to change the sear and trigger rod as well. Or at least a Retro Valve kit comes with one.

[GT]

Hye,
Just gased mine up. works just fine w/o any adjusting. I havnt played with it just shot about a hopper in the back yard.

jB