level 10 prob

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Psychotron
    Registered User
    • Oct 2002
    • 17
    #1

    level 10 prob

    ok first of all i have a 68 classic pwr feed
    im useing carrier 1.5 2 shims and medium bolt spring
    ok when i hold trigger down air leaks out down the barrel what do i do to fix that?
    I tried to put the longest spring on and my velocity wouldnt go high enough to be able to cycle so whats wrong their?
    also is the white bumper better then the blue one cuz i think im gonna order a couple and i have a black bumber too anyone ever seen one before?
    k ty
    Tags: None
    • athomas
      Of course it works-its AGD
      • Jan 2002
      • 8039
      #2
      The higher valve chamber pressure with the level 10 may cause a slight psst once in a while when the trigger is held but it shouldn't be continuous. When you hold the trigger down and it leaks down the barrel usually indicates an on/off problem. Check your on/off o-rings.

      If you can't turn your velocity up high enough to fire the gun then you need a new regulator piston assembly.

      Most classic valves use a blue bumper but the other colored ones will work. They may be AGD or other manufacturer's products.
      Except for the Automag in front, its usually the man behind the equipment that counts.

        Comment

        • Psychotron
          Registered User
          • Oct 2002
          • 17
          #3
          ty very much im ordering a new reg. piston assembly im gonna get a spring pack too while im at it
          anyother things i should get while im at it?

            Comment

            Previous template Next
            Working...