Help w/ LVL10 + Hyperframe

[Stupi]

Okay, so my 68 Powerfeed is working fine with my HyperFrame, and I decide to put in the level 10 bolt. The bolt works awesome with the original grips that came with the gun (2 spacers, 1.5, middle spring - 2 of us have spent the last half hour playing with different paintballs on tape, nothing broken yet) but refuses to work with the HyperFrame. I've put the solenoid force value up to 09, and still nothing happens. I can hear the pin knocking on the sear, but there's just not enough force to release the air. I've tried to adjust the solenoids position, like was recommended in another thread, but no luck their either. What I'm wondering is how others got this combo to work, do I need to call for a new On/Off pin? am I doing something wrong? Thanks for any help.

[Lone Brain Cell]

I Have a classic,Booyah,lvl 10 and mine rocks, I havent done anything special, It just goes.

[Stupi]

what setup do you have though? spacers, spring, etc...

[steveg]

Stupi if you still have the stock grip put it back on
with the lvl-10 installed, see if everything works ,you
do need to turn up the velocity compared to the stock bolt.
this might be your problem anyhow

once you get the marker to fire with lvl-10 and the stock
grip put the HF back on, it will probably work now

If it still doesn't work install the lighter spring it
really should work with that.

but first before anything else just crank up the velocity
a bit.

[pbzmag]

Make sure that your using a fresh battery. I had the same problem. I bought a new battery and everything was fine. I also had to set mines to 9 to get it to fire. I'm going to do more testing to see if I can lower my HF setting.

[Stupi]

kinda working now

Okay, so I got it working for the most part now. Tried again, and it leaked, put on a smaller ring, fixed that. Bolt stick, put on another washer and it's good for the most part. There's some bolt stick every once in a while, I'm hoping it's just cause I'm using CO2 to do the testing, the closest HPA fill area is $8 a fill, and won't last as long. Other than the odd stick and leak when first gassed up, it seems okay. I still wanna trade for an Intelliframe though... dunno, have to wait til I play on Sunday...