Hello, I'm writing to see what would be the best mod for the warp feed hose. Either melting the hopper to have an indentation on the side or drilling a hole to place the hose through the hopper? What are the experiences good or bad with either one.
-
-
I'd imagine they both serve the purpose equally well... Melting is probably easier to do.I'm way too old for this ****. -
Well I don't have a warp but I do know that you can get super tight by drilling another hole into the mounting bracket which moves the whole warp closer to your marker. Then you can melt a hole in your revy to make it even tighter, althought I suggest using an old 200 rd(non-motorized) hopper for practice. Good luck, and welcome to AO.Comment
-
drill through
the best way to stay tight is probly to drill whole it is alot easier and it stays tight and you can take the house off instead of having it melted inComment
-
I drilled mine. It seems to work very well for me. Personally, I like it better because it holds the whole setup together, makes the hopper stick in there better and you don't have to worry about it wiggling around, etc..
My Trading Feedback
"The only thing necessary for the triumph of evil is for good men to do nothing."
-Edmond BurkeComment
-
Drill it. I did on my old mag. For all of the reasons joeyjoe said.Comment
-
Drill it. I did it on my Revo, and on my HaloB. Works like a charm. It's quite easy to do, really (at least for the Revo).Intimidator Shocktech with Technatrigger.
AGD Emag Extreme C&C Lvl10 ACE.
"Pandora, that is the FIRST C&C Extreme to ever be sold." Manike
"Destruction and reckless abandon. And you all helped to create it!
WAY TO GO!" The EVE Online TeamComment
Comment