68 Automag Problems

[joshfudge]

this man not be important enough to be in here but i need help...ever since i bought my used mag i've been having de-cocking problems and the bolt would jam becuase of a faulty nubin on my barrel, i'm still waiting on receiving my stuff from agd but she said it's gonna take awhile...i have a feeling i'm not gonna get the video, manual parts kit or the parabola pf plug that she said she would send...i always get jipped online and i can't play cause i can't trust my mag to not break paint cuz of feed probalems, the sticking cuz i only have one nubbin that it bent wrong and teh decocking problem...thanx for reading....any help would be great!!

Josh

[DirtRider]

your gonna have to back up a littl, explain this deccking problem

[DaosBeoulve]

And after you explain the decocking problem, toss out those old bent up nubbins and put out the $4 for some good plastic ones. That'll solve one of your headaches.

And don't doubt AGD. If you called and talked to one of the AGD office girls and they told you they'd put the video and all in there, they will.

The parabolic feed plug should fix most of your 'feed problems' as well. And where are you breaking paint? In the breech, or down the barrel? If it's breech breaks, have you thought about the Lvl10 kit? It basically eliminates breech breaks and any type of break associated with the bolt and short stroking.

Anyways, one step at a time. What about this decocking issue?

[joshfudge]

de-cocking

it just de-cocks...like i'll be playing and tehn i'll take one or two shots and then it will not re-cock and i have to take of the air, and then unscrew the strip pin and take the valve out and the air run out like "pssssst" then i gotta push teh lil on/off thing on the bottom back in cuz it pops out and tehn i put it back together and i take a couple more shots and it does the same!!and this joanne girl emailed me when i reregistered my mag and said she'd send me that stuff no charge but it would be a few weeks!!

[rikkter]

sounds liek your getting bolt stick
try when it doesn't recock, use a squeegee and push back on the bolt til it clicks.
then order pt spacer kits and read the instructions oin that. if you have bolt stick go a size up.
also, try bending the nubbin back to how originally should be.

[spazzed]

Also make sure that both the frame screws are Firmly screwed in. If the front screw (in front of the trigger) isn't screwed in all the way, the on/off pin will get hung on the body rail.

[joshfudge]

tried it all

i tried all that, the bolt doesn't stick when it de-cocks...i guess i'm just gonna sell it if anyone wants to buy this piece of ****...

[spazzed]

send it in to AGD. So long as you've still got stars on the valve, they'll fix it for Free.

[rikkter]

does you spring ont he bolt go lower then the tip of the bolt?

[joshfudge]

...

nope the spring it a lil longer...and there never were any stars on my gun, there's no way i'm paying to send my gun back and get ripped off by AGD any more....i'm all ready getting shafted on teh whole them sending me stuff but not replying to my and even just having this gun makes me hate AGD! i'm never buying another AGD product ever! i dont care if they're giving them away! i've been trying to trade it for a tippy a5 or a cocker if i could get one not likely for my mag...anyways i've wasted enought time and money on things that aren't gonna work and i'm sick of this...later
~roCk

[spazzed]

If you'd calm down & explain EXACTLY what's wrong, & PRECISELY answer our questions, we could help you out.

As for the stars, look on the valve, are there any there? DO you have a stock valve? Or do you have that ANS crap?

[joshfudge]

ok man i explained the problem do u not understand!!!!! i dont knwo what teh hell is wrong with it!!! if i knew it would be fixed by now!!!

[joshfudge]

i dont think they will take it back because the body rail was polished !

[spazzed]

It doesn't say anything about polished body rails in the warranty.

http://www.airgun.com/WarrantyPolicy.shtml

My advice to you is to Call Them!!

[z-zero]

Man calm down, I've read all your other threads and seems like your just repeating yourself about how you think AGD sucks blah blah yadda.

If you would just take a step back replace your nubbin with some plastic ones, buy an o-ring kit install the new o-rings, then see if you have problems. All that might cost $25. Seems like you bought the Mag just when it needed to be rebuilt. Did you check the bore to bolt match? Do you have a power tube spring or spacer? Are you using co2? Are you running an Anti-siphon tank? Do you have a x-chamber? Your gun just might be freezing when you get liquid in the valve. If your using hpa then maybe your nubbin is wedging the bolt into the breech. How bad is your nubbin? Please give us a complete description of your setup from tank type and size to on gun or remote etc.... Also see if there are any after market parts in your valve, check your bolt and on/off there are pics of the stock stuff in the parts replacement section of the online store. Sometimes after-market parts can screw up a valve cause there not machined to the same tight tolerances as AGD. We will get you up and running for your tourney if you answer the questions above. AO can only help those who help themselves.

You also might want to walk through this

http://www.airgun.com/debug.shtml

Lots of helpful stuff there, that will help you help us help you.

Thanks,

z-zero