will parts from an Automags parts kit work for my apoc, thanx
-
Richmond
Forest Green Unmilled Viking #475
(black razor blade and black sticky3s)
black 14in Powerlyte Scepter Kit
Black Halo B
88/45 Centerflag Hyperflow Stub -
my basic rule of thumb, is yes if it looks like that will fit, it will. (meaning: just dont try to put a wire nubbin in place of the valve pin
. yeh, they are interchangeable for all practical purposes
-
thanx,man the reg seat seems to fit, so thats whats gonna replace it
Richmond
Forest Green Unmilled Viking #475
(black razor blade and black sticky3s)
black 14in Powerlyte Scepter Kit
Black Halo B
88/45 Centerflag Hyperflow StubComment
-
The reg seats ARE harder and ARE different. It wont last long...get the right one from AA.
Comment
-
weve had Mag seals in a teammates AA for over 8 months now...prolly 25,000 cycles in that time....wow, thats alot!Comment
-
Actually in SOME systems the Automag seat will work, in other it will fail and eigher pass tank pressure to the gun or choak it complete off.
The only thing you can reliably switch between the 2 are the reg piston orings. Some other oring that will swap are the RT reg seat oring in the on/off of teh apoc and the on/off switch shaft orings are in the RT kit too as I recall.
Very vert early Raptors and Apocs will run way better with the Automag Reg Valve pin and seat than the hard AA ones. New T Rex Raptor and newer Apocs wont work well with those soft seats.
-RobertServing AGD customers since 93, wishing I could beat some common since into some of them about 5 hrs later.
MCB Feedback +35 --+-- Automags.Org Feedback +25 --+-- PBNation Feedback +24Comment
Comment