On/Off Pin Length

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Blaster
    Master of the Mag
    • Jul 2001
    • 101
    #1

    On/Off Pin Length

    Does anyone know the correct length for the on/off pin on the E-mag?

    My E-mag has always worked flawlessly until yesterday. Then out of no where the gun starts leaking down the barrell and will not fire. I took apart the entire valve and rebuilt it. I'm very familiar with the workings of the valve and I know it's assembled correctly. The on/off pin however does not seem to be long enough now to engage the sear. Is it possible i've seared off the on/off pin and now it's too short? Mine is 9/16" in length. By the pictures and video it appears it should be longer.

    Any help would be great.
    When the going gets tough, the tough use full auto.
    Tags: None
    • spazzed
      AOChamp
      • Jun 2001
      • 4461
      #2
      Stock E-mag pin length is .712"

      I'd imagine if you had somehow or another shortened the on/off pin you'd be able to visibly see it....
      I'm way too old for this ****.

        Comment

        • Blaster
          Master of the Mag
          • Jul 2001
          • 101
          #3
          I saw that .712" measurement on the E-mag parts list, but just wanted to double check. My pin is almost 3/16" shorter then .712". I know you would think you could tell by looking at the pin but it's such a clean break you can't tell. The pin is not bent or anything. The end of the pin just looks like it has some wear marks but it obviously a stress break then. And no I have never messed with it.

          Thanks for the help, Looks like I'll have to call AGD to get a replacement.
          When the going gets tough, the tough use full auto.

            Comment

            • spazzed
              AOChamp
              • Jun 2001
              • 4461
              #4
              No problem at all
              I'm way too old for this ****.

                Comment

                • Blaster
                  Master of the Mag
                  • Jul 2001
                  • 101
                  #5
                  Thanks again AGD...

                  Yup, sure enough, I talked to tech support and it's the on/off pin. They are sending out a new one ASAP, free of charge. I don't know how anyone can ever complain about AGD and there products and/or services. This is the third time they have helped me out free of charge and with polite service. I guess that's why both my guns and air tanks say AGD on them. Thanks to JJ (from the tech line)and to AGD...

                  -Jason
                  When the going gets tough, the tough use full auto.

                    Comment

                    • spazzed
                      AOChamp
                      • Jun 2001
                      • 4461
                      #6
                      Gunga methinks. Brains kinda crapped out right now. :/
                      I'm way too old for this ****.

                        Comment

                        Previous template Next
                        Working...