Mac Dev Conquest on E-mag??

[TrackManV12]

I wanted to get a light tank so I looked at the conquest and I saw the conquest doesn't work with the RT Valve. I was wondering if this is true.

[xen_100]

it will work, but it is not recommended. the conquest will only adjust up to about 600PSI........that is really not high enough for a retro valve to operate correctly.

[Mr. Grumble]

Say What?
I run a 88ci 4500psi Conquest on my ReTro MiniMag and ramp it up to 850psi output with no problem.
I get great responsiveness on the trigger and have never suffered shoot-down or starving.
I have, however, nearly busted my thumb with the On/Off. That thing snaps hard and fast when you de-gas.
-Mr. Grumble

[xen_100]

The Conquest air system has set the standard for flow consistency and efficiency. Key features include:

Super high flow rates allow for no drop off
Simple harmonic Motion piston provides incredible consistency
Carefully engineered flow paths give excellent efficiency
On/Off lever for convenience
Dovetail mount for versatility
Inline Filtration system gives durability
Burst disk, rated fill nipple and dual safety relief holes give unparalleled 4 point safety
macdev mini gauges add style and functionality
Macdev sponsored teams use the Conquest air systems on: Shocker, BM2K/Defiant, Sonic LCD BM2K, Angel (LCD and LED), AutoCocker, Spyder, Matrix and many more. We claim that there is no marker running at too low pressure for the Conquest to perform at 100% everytime*!

Available in 45, 68 and 91 Cubic Inch Systems.
-->*Automag RT excepted.<--

if you got it to go to 850, you are lucky. they normally wont adjust that high.

[TrackManV12]

What do you recommend I use for a tank? I it to be as light as possible but I want it to work on my E-Mag.

[xen_100]

SP max-flo, centerflag dynaflo, AGD flatine, AA raptor. if you want something cheaper, then the crossfire and the other high end screw ins work well.

[TrackManV12]

I'm not worried bout the price. I'm using a Pure Energy 68/4500 preset and want to upgrade to the lighest tank I can because my E-Mag is too heavy.

[xen_100]

other than a performance upgrade......the PMI tank should be light.

[Natrix]

My conquest works fine with my Emag. I have it set at like 700-750psi with the Lvl 10, and works great. Never get shootdown unless I'm out of gas. Trigger is repsonsive (though I usually don't shoot outside of electro-mode).

If you want light, but fear the Conquest, maybe that new WGP Gass system...Isn't it supposed to be made of titanium er something. I would imagine that to be pretty light