Hello all!
This is my first post here! Although I have been reading the boards for months on end and I feel like I already know many of you!
Anyways, more about me later... :)
I wish to purchase an Extreme Body to upgrade my Minimag. I will explain why in a moment. I have all the parts I need to complete the marker, but I lack one thing, a foregrip.
I believe that a hole can be drilled in the front lip to mount one, maybe even two, the second one being recessed a bit, and both being countersunk, for flush mounting. With two screw holes I could mount a RTPro foregrip?
What are all of your ideas on this? In order to make this work, I need a foregrip on that body, as I am unable to play without something to stabilize the marker with. Any suggestions? Have any of you already done this? Any recommendations for a foregrip? Does AGD already have a plan for this?
Here is the deal. I have a nice Minimag Retro, LX, Intelli etc, the works. I recently built my friend a RTPro, and the two markers should be the same, but they are not. His fires much nicer then mine and I know it comes down to the trigger sear differences. His marker makes me jealous, but they are two different animals. I am a front player, my Minimag is very tight. He is a back player and his RTPro is a beast.
After doing alot of research, I know that I do not want to build a RTPro, and I do not want an Emag. Too much to fuss with. But I have found that the new Upgrade Extreme Bodies use the RTPro Sear, so that solves my dillema! Except the foregrip. Everythign else will transfer over to the Extreme body, and I get a better trigger, and an even BETTER looking marker then my Minimag, which I didn't think was possible, but I am in love with the Extreme look.
What to do with that foregrip?
Thank you all for your time,
Mr.Orange
Team Reservoir Dogs
Naples, Italy
Black HR Minimag
Black Intelliframe w/ Blade Trigger
Retro Valve w/ LX
Flatline 68/3k
Black Riccochet AK
Lapco BigShot Stainless
Inferno Paintballs
Lapco Grey Spirit as Backup... :P
This is my first post here! Although I have been reading the boards for months on end and I feel like I already know many of you!
Anyways, more about me later... :)
I wish to purchase an Extreme Body to upgrade my Minimag. I will explain why in a moment. I have all the parts I need to complete the marker, but I lack one thing, a foregrip.
I believe that a hole can be drilled in the front lip to mount one, maybe even two, the second one being recessed a bit, and both being countersunk, for flush mounting. With two screw holes I could mount a RTPro foregrip?
What are all of your ideas on this? In order to make this work, I need a foregrip on that body, as I am unable to play without something to stabilize the marker with. Any suggestions? Have any of you already done this? Any recommendations for a foregrip? Does AGD already have a plan for this?
Here is the deal. I have a nice Minimag Retro, LX, Intelli etc, the works. I recently built my friend a RTPro, and the two markers should be the same, but they are not. His fires much nicer then mine and I know it comes down to the trigger sear differences. His marker makes me jealous, but they are two different animals. I am a front player, my Minimag is very tight. He is a back player and his RTPro is a beast.
After doing alot of research, I know that I do not want to build a RTPro, and I do not want an Emag. Too much to fuss with. But I have found that the new Upgrade Extreme Bodies use the RTPro Sear, so that solves my dillema! Except the foregrip. Everythign else will transfer over to the Extreme body, and I get a better trigger, and an even BETTER looking marker then my Minimag, which I didn't think was possible, but I am in love with the Extreme look.
What to do with that foregrip?
Thank you all for your time,
Mr.Orange
Team Reservoir Dogs
Naples, Italy
Black HR Minimag
Black Intelliframe w/ Blade Trigger
Retro Valve w/ LX
Flatline 68/3k
Black Riccochet AK
Lapco BigShot Stainless
Inferno Paintballs
Lapco Grey Spirit as Backup... :P
Comment