Flatline Reg. Maintenance.

[jewie27]

Is it normal to hear a sqeak from the Flatline every time I take a shot? I don't think my Flaline is flowing properly, the gun does not rapidfire any more; no matter what psi I set it to. I have a Minimag w/X-Valve. I can't shoot more than two or three shots in a row. It keeps "chuffing", not fully cycling. I've tried different springs and carriers with no luck.

[Josh515]

Thanks for your help

Great info in case mine ever messes up on me.Thanks again

[pbguru89]

k i ve got a flatline n itz leakin...im thinkin itz an oring problem...wat size orings are they
and where can i get it hydroed (ive heard someone on ao does it for reasonalble price)

[jewie27]

The 3K Flatline uses the same exact o-rings as in the RT parts kit. So if you have a 3K model use that. If you have 45K you gotta order from AGD.

[pbguru89]

umm...lemme rephrase my ?
if i do not own an rt pro wat size orings do i need

[jewie27]

I said if you have a 3K Flatline, USE THE RT PARTS KIT. They are the same O-rings.

[pbguru89]

i know that, but since i do not have rt parts kit and do not want to order one...do you have ne idea wat the 2 sizes are?

[jewie27]

i know that, but since i do not have rt parts kit and do not want to order one...do you have ne idea wat the 2 sizes are?

no I don't, I just use the RT Parts kit....

Same thing.

[ECD2004]

Please explain to me the following two things,
1. how do I adjustt the output pressure?
2. I got this in a trade and when I gased it up the output needle pegged to over 1500 and blew a gapping hole in the side of my macro

[ECD2004]

someone plaease help me out

[BlackHalo]

someone plaease help me out

Loosen up the lock nut on the front of the reg. Then use a hex wrench to adjust the velocity. In = higher, out = lower.

[Dook]

Hydro testing

I need to have my fibre wrap tank (that has a flatline reg) hydro tested. Do I have to remove the regulator to do this?

If so, how do I get it off? I don't understand the instructions at the beginning of this thread. Do I completely unscrew the output pressure valve at the front of the flatline system and then screw the whole thing off the tank?

Any clarification would be appreciated.

Thanks.

[Tunaman]

I need to have my fibre wrap tank (that has a flatline reg) hydro tested. Do I have to remove the regulator to do this?

If so, how do I get it off? I don't understand the instructions at the beginning of this thread. Do I completely unscrew the output pressure valve at the front of the flatline system and then screw the whole thing off the tank?

Any clarification would be appreciated.

Thanks.

You cannot remove the Flatline Reg correctly without special tools. It needs to be torqued back on correctly using the same tools. You need to send it to an AGD Tech or AGD itself to have it done. Don't mess around.

[MonsterMag]

Yeah dont mess with it , send it to tuna. He does a great job

[kayvon]

when i turn my flatline reg above 800 psi output it leaks out of teh ajustment cap. I also have an old mag that leaks when i tun it up to high. why does it do this and how do i make it stop?