a cocker body/internals question...

[Jonno06]

do you know if the internals to this gun below will fit in the body that i will pot in the next post..

it appears to be a 99 cocker,sO im not sure:-\

[Jonno06]

heres the spanky body

[Laser]

I would think the only problem might be the bolt.

[Jonno06]

what is the difference in the bolts?

[-=Squid=-]

It will work great, but you need a new bolt. Will you be interested in selling the other body when u get the spanky?

[Jonno06]

yea,i would need to sell the purple body before I get the spanky...and I wanted a new bolt anywayz....

[-=Squid=-]

How much do you want for it?

[Jonno06]

pm me,or IM me at Punk3rj0n69.

[Paintballzer]

nope, it won't work. If the first one is a '99 and the second is a 2k+. The springs for the valve and main spring, the banjo bolt (bolt that hold the front block onto the body,& the front block. won't work. The bolt will work if you use the right size back block for it.

[Hoplon]

Originally posted by Paintballzer
nope, it won't work. If the first one is a '99 and the second is a 2k+. The springs for the valve and main spring, the banjo bolt (bolt that hold the front block onto the body,& the front block. won't work. The bolt will work if you use the right size back block for it.

Thats $20 worth the parts not counting the bolt for those keeping track at home.

[Paintballzer]

About, but thats only cause hes getting the front block w/ the body. Make sure you have the valve tool and a 12 point thingy for the asa screw if your gunna do it yourself. Make sure to go to www.air-powered.com for your cocker needs, you'll get better answers about cocker there.