Replaicing stock trigger with double trigger HELP!

[AGDMag197]

I bought a double trigger from 888. Just the trigger not the whole new frame and everything so i had to cut off the trigger guard on the stock frame so the double trigger fits. The problem is i dont know how to get the stock trigger out and put in the new trigger. What should i do? Please be very imformative and specific.
THanks alot

[Havoc_online]

get a fine chisel/pick and pop the pin out with a hammer. Hit it from the right side so it falls out on the left side. when putting the trigger on, hit the pin in from the left side.

Your marker needs a trigger guard to be field legal.

[SeeK]

I guess that last part is a bit too late for him.

Use a nail head counter sink. It has a flat head so it won't move. What ever you use be sure to tap it out slowly so you don't risk missing and scratching stuff up.

[Havoc_online]

back in the day I made my own trigger guard. get a aluminum bar(flat about 1/2" wide) bout 9" or so, drill two gripscrew holes in it, bend it so the other end reaches the rail.

[AGDMag197]

thanks alot.....ill try that and also thanks for the trigger gaurd idea i wasnt sure what i would use..i was concerned on the trigger first. ill try that and i dont get it ill come back with more questions