YEA, MY RT KEEPS BREAKIN PAINT AND ITS HARD TO SHOOT ONE BALL AT A TIME. I HAVE A PRESET TANK, I THINK ITS SET AT 850, ITS A PMI 88/3K. I HAVE HEARD A COUPLE POSSIBLE REASONS FOR IT TO BE SCREWED UP, WHAT IS THE MOST LIKELY?
-
------------------------------------------------
Email----> [email protected]
AOL IM----> DruMmR686 or pbdrummr6
Feedback----> Click Here
"For A wounded man shall say to his assailant, 'If I live, I will kill you; If I die, you are forgiven. Such is the rule of Honor." -Omerta, Lamb of God -
Worn Main spring or sear tip -
i just checked and main spring and sear are in good condition. any other suggestions?------------------------------------------------
Email----> [email protected]
AOL IM----> DruMmR686 or pbdrummr6
Feedback----> Click Here
"For A wounded man shall say to his assailant, 'If I live, I will kill you; If I die, you are forgiven. Such is the rule of Honor." -Omerta, Lamb of GodComment
-
Are you absolutely sure the main spring and sear are in perfect condition?
Set the main spring up beside your bolt. Is it longer than the bolt? Is it right at the same heighth? If it is, might want to replace it.
Check the sear very carefully. If it's scratched up, got worn out edges, or is anything other than perfect, that could be causing your problem.
Also, when you gas up your gun, is there any distance between the trigger rod and the trigger? It should be about a credit card's width space.
Is it an old style RT, or RT Pro?Don't think of it as being outnumbered, think of it as a wide target selection.Comment
-
my teammate had this problem.... he had a worn sear, and replaced it. Works like a champ!Comment
-
daos, what do u mean by length of the bolt? do u mean the overall length or just the part the spring slides on to?
and its a less than a year old rt pro, so it has the intelliframe------------------------------------------------
Email----> [email protected]
AOL IM----> DruMmR686 or pbdrummr6
Feedback----> Click Here
"For A wounded man shall say to his assailant, 'If I live, I will kill you; If I die, you are forgiven. Such is the rule of Honor." -Omerta, Lamb of GodComment
-
Your on/off pin may have broken. If you have calipers, it should be .765" long (just over 3/4").Comment
-
what he means is. If you set your bolt on a table with the spring on it. the spring shold be longer than the bolt by about 1/2 inch or so.Originally posted by drummr6
daos, what do u mean by length of the bolt? do u mean the overall length or just the part the spring slides on to?
and its a less than a year old rt pro, so it has the intelliframe
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
Comment