Need Some Help!!!
I have a mag thats getting up there in age, which does seem to affect them to much. Anyways, I want to use it again. I would like to replace all the o rings and whatever else gets allot of wear on it. I pretty sure I can do all that, but are there o-rings that need a little lube on them or something? Basically my question is: can I just replace all the o-rings and go or do I need to also do something else? I hope I made myself clear on this, any help is always very much appreciated.
-
-
yup... just change out the orings and once back together put a couple drops of oil into your airline gas up the marker and fire untill the oil does not spray out anymore.... also do that with out the barrel on..... degas and your done......
also change the bolt spring while you have access to it.... sitting for the amount of time you have mentioned it probly lost some of its spring.....Virus, King of the Basement Trollz has spoken
-
Thanks, will do.Comment
-
yeh, replace the orings and put some oil in the ASA. changing the bolt spring isnt too necessary, acutally. because its stored in the full position(bolt is open, spring has no tension in it) it wont lose any strength. you need to do tis when you store spyders in the cocked position....
Comment
Comment