:Problem with my mag

[IcantBelieveit]

hey guys i am having problems with my mag
the bolt won't go all the way back on the power tube! What would casue this? i have to stick my finger down the barrel and push the bolt back
any ideas
thanks

[digitard]

How old is it? Have taken it off and re-oiled the valve, cleaned it/etc?

It might just be dirty so getting some intense resistance.

SIncerely,
Dave K

[Tunaman]

If you have a Level 7 Mag, I suspect that your Powertube Spacer is too big, clamping down too hard on the Powertube oring making it too tight, causing bolt stick. If you happen to have a Level 10 installed, please switch to a larger oring carrier. Let me know if this helps.