Stripped Bottomline Screw HELP

[Brak]

I was trying to take off my bottomline screw off of my RT and i stripped the crap out of it. the regular allen keys dont work and the bigger ones won't fit. help me out! how do i get it out? im going to install a drop forward and i have to take off my bottomline.
(its an ACI bottomline, so i cant blame my AGD gun)

[old mag man]

If you have access to a drill press or at minimum a cordless drill, you can grab a bit the same size as the head of the bolt and carefully drill until the head comes off and then slip it past and remove the rest of the bolt with pliers. Another option is an easy-out where you drill a correct size hole that matches the easy-out, inserting the easy-out will back out the bolt!! Good luck and be patient!!

[Matt Crawford]

well is both screws stripped? if not, take one screw out then twist the ASA around back and forth till the stripped one loosens. then stick an allen wrench in the screw and it should some what grip it,if the screw is loose.

Hope this made sense...Case really I really do know what I am talking about.

[Brak]

thanks guys, but matt, before i read your post, that is what i did after a drill didnt work and it came right off!