I bought my mag used and never gassed it up until i installed lvl 10 and put all new o-rings, a new reg seat, and cleaned it with rubbing alcohol. I go to chrono and i am getting +/- 10-15. Really annoying. I'm thinking it is the balls because I have a new Air America Me'lee that works very well. The only thing though is that it has happened to me on more than one occasion using different tanks. Any suggestions?
-
Agawam Paintball
_________________________
RT polished pf left
Level 10 Inside
Chrome CP 12"
Chrome Y-grip
-Intelli-feed
Black Check-It Unimount w/ Bleed on/off
In need of a tank -
i quote a very smart man, Bud Orr (even though we hate him here
) "90% of velocity fluctuations are due to hte paint to barrel match"
yes, make sure your paint fits in the barrel! that should help you out. if not, try changing out the spring pack or at least lubing it with some grease
-
it might be the reg seat, if you need help locating it, just look at <a href="http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=153&CATID=6">this</a> ... it is <a href="http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=49&CATID=6">this</a> part exactly, you could get it in a parts kit.Comment
-
ha! i beat you! **THBBBT**
and yes, when Orr said that he say "hte"
Comment
-
thanks
yea. That is what I was thinking. The balls were small so they were going all over the place. Also, i chopped two today with the lvl 10 becuase i wanted to get more shots per tank so i slipped in the medium spring but i guess its no good. Thanks for the help guys.
Agawam Paintball
_________________________
RT polished pf left
Level 10 Inside
Chrome CP 12"
Chrome Y-grip
-Intelli-feed
Black Check-It Unimount w/ Bleed on/off
In need of a tankComment
-
well, on my back up mag i'm having inconsistency problems. and they're more thenjust 10+/-
i put the input pressure up slightly and that fixed it a little. but its still inconsistent. my main mag is excellent in consistency. i even used same barrel and same paint on both and my back up had worse consis. its NOT the reg seat as i've replaced it many times thinking it was. its not blockage in hose or anything as i checked and cleaned it.
is it the spring back in the back? i purchased a new one anyways but yet to test it. but would this fix it or no? i dont really know what else it could be. its not the input pressure as i have a flatline tank that i refurnished already. just ahh. help.Comment
Comment