Unable to get velocity above 220

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Severe
    Leader of Lililputions
    • Feb 2002
    • 315
    #1

    Unable to get velocity above 220

    Hey all. I did do a search and didn't find anything that looked similar enough to my problem to rely solely upon that. Besides, some of you 'Mag-brainiacs love dealing with issues.

    I've just recently recieved a used Micromag with a 3 Star AIR vavle on it. Yesterday was the first time I could get it to a crono. While the marker functions perfectly, I can not get my velocity above 220. The valve does have a Knob velocity adjustment nut rather than the standard Regulator Nut. Unfortunately, it's turned all the way in.

    I've thoroughly cleaned the whole valve and everything seems to be in good order.

    Ideas?

    Also, what if I put a small washer between the Spring Pack and the Velocity Adjustment knob to give it the ability to put more pressure on the spring pack. Would that be "BAD" per se?

    Thanks for any input!

    Steve
    Lvl X TKO Automag PF/HL, Intelliframe, a Simmons 30mm Red Dot and a J&J 12" Ceramic barrel.
    Crossfire 68/4500
    -------------------------------------
    Die Hard Woods Player
    Tags: None
    • kevmaster
      Owners Group Div: Director
      • Oct 2001
      • 5475
      #2
      steve, id love to get with ya sometime to play. check out the NC AO Day thread in the main forum. were all going to play!!

      anyways, i would try the stock nut. the wrenchless part may limit how far you can turn your thing in. at the same time, put new springs in there. yours may be too worn out. in hte mean time, yes a washer in there will work fine....reminds me of the days of dimes regulating the velo on my stingray...add one for a 20fps increase, take one out for a 20fps decrease....hehe

        Comment

        • Severe
          Leader of Lililputions
          • Feb 2002
          • 315
          #3
          Thanks for the suggestions Kevmaster!

          I saw your thread on the Mini AO in Greensboro. I'm going to mention it to the guys I play with. 3 mag users total. Only problem I can see, is this close to Christmas, all of us are trying to save $$$ for gifts.

          Steve
          Lvl X TKO Automag PF/HL, Intelliframe, a Simmons 30mm Red Dot and a J&J 12" Ceramic barrel.
          Crossfire 68/4500
          -------------------------------------
          Die Hard Woods Player

            Comment

            • kevmaster
              Owners Group Div: Director
              • Oct 2001
              • 5475
              #4
              yeh, i know. its tough, but if you can make it wed love to haev you

                Comment

                • Nobody077
                  Yes Im still alive
                  • Oct 2002
                  • 559
                  #5
                  I added a old reg-seat between my springpack and the velocity adjustment knob. This will add 4-5 more turns of adjustment and doesent block the "over-pressure" venting feature of the AIR valve.
                  Great Traders: RogueFactor,Doobie

                    Comment

                    • IcantBelieveit
                      Registered User
                      • Nov 2002
                      • 1339
                      #6
                      i am confused. b/c AGD mad a tourney lock, that was a "nut" that went over the stock velocity adjuster? Is this what you are talking about when you say "nut" or are you talking about the thumb adjusters? Bc if you are talking about the tourney lock you have to take the "nut" off before you adjust your velocity
                      MY FEEDBACK

                        Comment

                        • Severe
                          Leader of Lililputions
                          • Feb 2002
                          • 315
                          #7
                          Nobody077 - Yeah, that was my exact line of thinking. I just used several small washers to achieve the same result. I think this is just a matter of the Adjustment Knob not having enough depth to reach decent velocity.

                          IcantBelieveit - The Knob I have replaces the standard Regulator Nut. So it has the same function as the Tourney Lock, just it's an entire assemlby.

                          If I had the Regulator Nut that came with the valve I would have used that, but unfortunately I don't. If I can squeeze by with this work-around, I'll be good.

                          Thanks everyone.

                          Steve
                          Lvl X TKO Automag PF/HL, Intelliframe, a Simmons 30mm Red Dot and a J&J 12" Ceramic barrel.
                          Crossfire 68/4500
                          -------------------------------------
                          Die Hard Woods Player

                            Comment

                            • IcantBelieveit
                              Registered User
                              • Nov 2002
                              • 1339
                              #8
                              go to www.airgun.com and buy you a new one..i think it is like $8
                              MY FEEDBACK

                                Comment

                                Previous template Next
                                Working...