drop zone 2 with 114ci problem

[itspanitsplater]

I have just got a drop zone 2 for my Minimag. I have a 114ci crossfire nitro tank, hyperframe and a warpfeed all in my Mini. My problem is the warpfeed is hitting the tank. I have done my diff thing to get this system to work but it will not. WHAT CAN I DO?

[alf]

bracket mod

you may have to modify the warpfeed bracket...i think bad dave put up a thread on it...search for it...basically, what he did, was drill another hole in the bracket, so that it mounts the warp at 90* to the grip, instead of at an angle out from it...this gives it a bit more side clearance

i did this and have pics if you would like to see it...email me at [email protected]

-alf

[gadget68]

I had the exact same problem. I took the bracket that came with the warp to a local sheetmetal shop.I had them custom make me one from a cut out I designed using the original and lengthening it. If you want to see pics check out my thread below. The new bracket makes the warp paraell to the gun. It cost me about 25.00. A bit steep but when you live in a small town in Alaska you have to go with what they have.

http://www.automags.org/forums/showthread.php?s=&threadid=13374

If this thread dosn't work e-mail me.

[GOREHAMMER]

Call your brother!!! he will teach you everything you need to know http://www.geocities.com/GOREHAMMER1/GUNS.html

[itspanitsplater]

brother need to learn a lot more before i call him about a problem last time i called u sead to hit it around to make it fit. So r u going to play this sunday with me