L10 bolt+spring stuck in RT

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Skeetmaster
    Registered User
    • Sep 2002
    • 50
    #1

    L10 bolt+spring stuck in RT

    Hi peeps.
    Took my valve out of my RT for the first time since L10 was installed by AGDE.
    The mainspring (long one) and bolt were stuck in the body and neaded (ahem) gentle persuasion to get it out.
    Whats that all about then?
    Gaz
    Tags: None
    • Pand0ra
      Don't open the box
      • Sep 2001
      • 377
      #2
      There's an isue about some bodies out of tolerances. Looks like the diameter of your bolt is a bit too high for your body.

      You'll probably have to file slightly the body of the RT to correct this problem (or put the bolt on a lathe to reduce his diameter).

      @++
      Intimidator Shocktech with Technatrigger.
      AGD Emag Extreme C&C Lvl10 ACE.
      "Pandora, that is the FIRST C&C Extreme to ever be sold." Manike

      "Destruction and reckless abandon. And you all helped to create it!
      WAY TO GO!" The EVE Online Team

        Comment

        • Schnitzel
          'Saurus'
          • May 2002
          • 754
          #3
          that happened to my brohter several times, but somehow it stopped....maybe it got itself into the right diameter?

          BEST DEALER: RogueFactor

            Comment

            • Thump152
              Capt. Team Dead Cell
              • Nov 2002
              • 76
              #4
              Bolt stick

              If the gun fires and you get bolt stick, add more shims to your level 10 till it does not stick. And yes the level 10 can be to big for the body. In my micro emag I had to file out the body just a hair and it worked perfectly.
              Guys always complain about getting shot to much, I stopped shooting when I seen the first one hit you, I can't help there was still 9 more in the air. My set up is Black CNC X-MAG, 14 inch Powerlyte Scepter barrel kit , Shocktech Drop, 88ci 4500psi pure energy nitro tank, Warpfeed with EVO 2 on warpfeed.

                Comment

                • Skeetmaster
                  Registered User
                  • Sep 2002
                  • 50
                  #5
                  Hi.
                  Not bolt stick-bolt stuck!!
                  Gun works great, was just a bit miffed at having to beat the spring and bolt out of the gun. Will look at smoothing the body out.
                  Cheers
                  Gaz

                    Comment

                    • athomas
                      Of course it works-its AGD
                      • Jan 2002
                      • 8039
                      #6
                      Check for burrs on the hole in the washer that separates the front and back sections of the body. Gently file the inside of this hole and it should be fine.
                      Except for the Automag in front, its usually the man behind the equipment that counts.

                        Comment

                        Previous template Next
                        Working...