my rt valve keeps sticking and sputtering and just wont shoot right, does anyone know why it would do this?
-
-
1. Post this in Tech Talk, that's where we handle problems like these.
2. Provide more information.Christian, and proud of it.
My setup, built by Tunaman:
http://www.automags.org/forums/showt...threadid=50949
Good Traders: Tunaman, dnm5d, vf-xx, cphilip
FOR SALE:
One 'cocker barrel and a pre-2k APBBOLTS anti-chop bolt. PM for info. -
What kind of information do you want? When I pull the trigger it sputters and sticks alot...Comment
-
your sear is worn..dont think its new
"You should buy my gun because I have 5000 posts that say I care."-AGDComment
-
Gun type, valve type, SN, lvl 10 or lvl 7, CA or CO2, etc.Originally posted by MinimagRockin'
What kind of information do you want? When I pull the trigger it sputters and sticks alot...Christian, and proud of it.
My setup, built by Tunaman:
http://www.automags.org/forums/showt...threadid=50949
Good Traders: Tunaman, dnm5d, vf-xx, cphilip
FOR SALE:
One 'cocker barrel and a pre-2k APBBOLTS anti-chop bolt. PM for info.Comment
-
It's an rtp valve on a regular mag setup. Dye 2x frame. toxic toys venom bolt (tried a different bolt and spring that didn't do anything). HPA obviously. replaced orings and pwr tube spacers as well and that didn't do much.Comment
-
Do you have the stock long nose to put back in and try?Don't think of it as being outnumbered, think of it as a wide target selection.Comment
-
Check the operation with the long nose (stock) bolt, check you sear for excessive wear (as mentioned), and make sure your trigger rod length has not been messed with!! If, when gassed up, the trigger is pushing against the trigger rod with no play, then your trigger rod is too long, and in need of adjustment, sometimes, when you change grip frames, you might have to readjust your trigger rod also!!! Hope this helps!!E-Mag's on a diet
Stay tuned for Pics!!!
Centerflag 201 series 68/45Comment
Comment