Need help with a shocker

[Chris]

I just picked up a shocker, and need some serious help with it. To make a long story short, I got screwed again. Shocker was supposed to be mint, its got problems left and right.

1) max flow reg leaks like a mofo when i screw an HPA tank in
2)NO BOLT! I screwed out the back peice on the top tube, and there is supposed to be some sort of bolt or bolt head I assume, but there is nothing but this. Sorry about the quality, its a crappy webcam.

If anyone can help me out with this, it would be greately appreciated. Also, there is supposed to be some sort of shocker lube, can someone tell me where to get this.

-Chris

[blembiggity]

u should change the spring out on your max flow. i had the same problem and went with the smaller spring from the smaller reg and it worked. shockers love to run off of co2 and sometimes dont like hpa.

as far as the bolt goes, that is your bolt. it is all one piece. you should be able to move the part with the o-rings back and forth. the lube is just a high temp greese basiccly. i have some if u need it.i hope this helps u out.

[Chris]

Thanks with the maxflow part, I will try that. I did find out that I am missing the bolt head itself. If anyone knows where I can get one, or has suggestions on what one to get, let me know.

-Chris