Can a No Rise fit an Automag?

[SirLloydAlexander]

They say that the bodies fit emags and RT's. Is there anyway to get them to fit regular automag bodies? I really would like one to fit this automag Im working on with a level 10 and an ReTro valve. It would be a wonderful addition, since I've noticed a tremendous reduction in blowback recently with the LX bolt. Thanks for the help.

[Blazestorm]

Ta da

[SirLloydAlexander]

I was under the impression the body styles were different. I guess not.

[Havoc_online]

I just checked and they DO fit. The classic rail has a rectangular slot for the body and the Emag rail has a circular hole however the circular Emag/RTP body fits in the rectanglur slot on the AM/MM rail.

[SirLloydAlexander]

so, If I just bought the RT Pro body rail, it would fit?

[toymyster]

You can use the RT Pro/ E-mag bodies on the Automag/Minimag rail!! They fit right on without any midification!!

[SirLloydAlexander]

You really like the exclamations, and thank you very much for the help. You wouldnt happen to be a teacher would you?

[Derman2k]

Heh...I noticed he uses alot of exclamations too.

Where could I get a no rise?

[SirLloydAlexander]

same place I am. Right here. When they come in stock. Which should be eventually. They are worth the wait, and their weight in gold.

[Derman2k]

Here??

You mean in the Forum? or the AGD Store?

[digitard]

So basically, im asking if I'm right, you can use ANY Emag/RT pro/Mini/Classic body interchangeable on the classic rail .... EXCEPT the actual RT body (non-pro) ..????

Thanks for the confirmation,
Dave

[Blazestorm]

Old School RT's are completely different ignore them for now.

Any current mag body, will fit the classic rail.
Any current minimag/automag body, will not fit the rt-pro, emag, or UL rail without modification

pie :)

[digitard]

Thanks Blaze, I might have to just change out my body on my classic (although its getting a ReTro valve shortly)and change it to a polished no-rise.

:)

Sincerely,
Dave

[RobAGD]

Actually you need to watch out that the radius on the round pim isnt hitting the edges on the RT Pro/Emag body. If it does just round down the sharp edges on the rectangle hole in the rail.

-Robert

[swamprat33]

Looks COOOOL, BUT, what is likely to work best on a standard LX Mag?

I currently have a Level 7 (soon to be LX) PowerFeed Mag and wonder if a low rise will work better or not as well as a PowerFeed body. Also , what is the deal with barrels for one of these bodies.

Thanx