Warp mounting problems

[JT2002]

i just got my free warp yesterday (thanks ao chat party!) and was isntalling it on my standard feed mag. the problem is that the tube that came with teh warp isne long enough to get either over the top of the gun into the 90* adapter or under the grip and into the adapter. any help appreciated. anyone else having similiar problems?
should i try to cut my feed tube? if so what should i use.
thanks, JT

[digitard]

It wont fit into the normal part of the feed tube? Check the thread below to see what I'm talkin' about.

http://www.automags.org/forums/showthread.php?s=&threadid=59526

Sincerely,
Dave

[JT2002]

nah, you see, i have a STANDARD feed body. this is the really long one that sticks out the right side. think of a standard feed autococker and thats basically what it is but longer

[EsPo]

try putting the 90 degree on the warp feed then running the tube under the grip frame.

[JT2002]

nononnononononononoo. u ppl still dont understand. THIS IS NOT A POWERFEED BODY!!! the feed tube points towards the sky. look at the pic. see the feed tube pointing up?

[Havoc_online]

post a pic with the warp on and the hose leading to the feedtube. (so I can see how far you need to go) tell me how many inches you need to reach.

[IcantBelieveit]

go to www.airgun.com and go to spare parts. then to warpfeed, and get a 90* adapter

[JT2002]

i cant believe it... it comes with a 90* adapter, oh u mean get a second? would work but i dont think it will look so good and its not very cost effective. havoc im goin to take a pic now. check back in 5.
lata, Joe

[IcantBelieveit]

oh i didn't know it came with a 90* i am still waiting for my warp to come. hrrmmm i don't know looks like a tough call. I am sure someone here knows though

and you can't take the 90* and put it on the feed tube, and then stretch the hose to the 90* fitting? I am not sure i understand where your problem is occuring

oh and the 90* are only a couple of bucks

[JT2002]

ok, from playing around with the 90* fitting (warp only comes with one of them "i cant believe it") i found that the 2 90* fittings would work, but the tube seems to get in the way of my shooting hand, an extra inch or so would fix that. the second method of mounting that i found, and prefer, is in the pic. even though it fits the tube at the 90* and the warp r angled a lot and on the 90* its angled in that it looks like it would not feed well through it. it forms no smooth curves, only two sharp bends at the 90* and the warp.
havoc, i think that an xtra 2-4 inches (somewhere in there) would solve my problems. if theres any way anyone can help please let me know. although the second method might work, like i said there are 2 sharp bends in it and xtra hose length would make everything fit smoothly.
thanks, Joe T

[JT2002]

whoops! sorry i didnt realize the pic would be so big lol.
also dont forget that the warp will be a little lower because i just need to get a longer screw, the warp will be under a custom trigger guard and above a big drop foward. that will make it a little lower.

[Havoc_online]

pm'd ya

[JT2002]

thanks, if u can post that pic id really like to see it. pm'd ya.

"Havoc_online
Keeper of the Supermag(s)"? what "super" mags do u own

JT

[IcantBelieveit]

ahh i see your delimma now!

[Havoc_online]

Originally posted by JT2002

"Havoc_online
Keeper of the Supermag(s)"? what "super" mags do u own

JT

supermag(s)