ANS bolt

[RAW]

Are the ANS venturi bolt worth it?, I have a stock standard Automag 68 powerfeed.

[Xzion]

Ive never actually used one, but ive seen others who have state that they wear faster, and only cause problems in the long run, the same goes for any aftermarket valve 'upgrade' parts. Keeping your valve stock, is as good as the valve is really going to get, as thats the way AGD intended it, to be the best it possibly can. If your looking for more performance, the only real valve upgrade is the ReTro valve. As for the bolt, the only other option is the AGD long nose bolt, and the new 'Super Bolt' being tested by AGD right now. do a search for info on both.

[e21bgl]

Nothing improved at all !!! Stock bolt is the best



-68 Automag PF
-PPS 12" vented barrel
-Smart Parts Expansion Chamber

[paintballisking]

NNNNNNNNNNNOOOOOOOOOOOOOOOO!!!!!!!!!!
had one never again the post of the bolt actually broke off in the power tube. I had huge problems with it here is a tip that that took me one purchase to figure out DON'T buy parts for that mag unless it says agd on it. tom kaye knows what he is doing!!!!! if you want a knew bolt get a new agd bolt with a extended sheath on it to reduce ball breakage. another thing it didn't help accuracy

hope this helps

[DRAGONSLAYER]

Like Xzion said, it wears fast. Plus it will cause your gun to leak down the barrel, causing you to buy the power tube spacer kit(around $20). Then it will not stop leaking, and you will put your stock bolt in and no more problems. Yes, this is my true story. Keep your valve all AGD and it will be good to go!

[kickass68mag]

ans bolt

i have one now, i have noticed minimal gas efficany, the only reason i have it is because i got it for free and i don't have another bolt for my gun cuz i sold mine to my friend. all in all i don't notice any differnce exect a little lighter trigger because i had to get a new pt spacer. if your rich and don't mind spending the money go for it !

Keith