help!! need advice for changing a rail
I just got a new rail from omega and I got eveything on except that little part at the front of the rail. Its the part the sticks up inside the chamber and locks the barrel in place. I don't want to damage the little part so does any one have some good advice on how to get this peace out so i can drop it into my new rail. I know this thing should come strait up but its not going easily.
-
"This is a target rich environment"
TKO Automag Classic
Custom Automag
Omega Black Rail, Intelli Frame, Warp and Revolution Loader, ACI Q/D, Dye Boomstick (12inch), AGD warp feed mainbody, 32 degrees gas thru grip.
(future mods drop forward or remote and X valve.)
pure energy 68 cu
Cool paintball stuff http://www.flurryindustries.com/ -
It is pressed in, so you will have to press it out!! If you are Careful , you can take it out with a small punch and hammer!! Otherwise, use a press, or a bench vise as a press!!E-Mag's on a diet
Stay tuned for Pics!!!
Centerflag 201 series 68/45
Comment