Can you throw a stock 'mag valve in the no-rise body? Or is it e-mag only? I'm a little confused on this. I was thinking about building up from a no-rise body and don't know what valve you use for it. Thank for all help.
-
-
Yes.Can you throw a stock 'mag valve in the no-rise body? -
Gracias, 2nd question, almost certain on this. The I-Frame works on the body, right? I think I've seen it on someone's already. Thanks for help and I might be looking for one of these in the next few weeks.Comment
-
it's not the frame it's the bodyrail but ya it'll fit.
Comment
-
Havoc, you have been given uber-thanks, and now, santa will not nuke your house, he'll just use biological weapons instead.....j/k...help was appreciated.Comment
-
another thing about vert feed bodies is that you have to hunt down the vert feed mag barrels to go with them, and the stock one isnt that great
ANY body except for the classic RT body will fit the AM/MM body rail
and regular intelli frames will fit any rail except for the classic RT, and AGD makes a version for the classic RT too
plus, any valve is interchangable with any body/body rail/trigger, except for the classic RT again!
(rt classic had a longer body and a smaller diameter valve that went inside it, along with a "banjo bolt" which connected to a port on the bottom of the valve to supply the air, instead of the side input port on all mags today, and the banjo bolt required a larger hole in the back of the trigger frame for the field strip screw/banjo bolt)
hope this helps
-sneakyProud Member Of The AO Cesspool Since 08-24-2002Comment
Comment