-
`Intelli+ -
Re: E-mag
1) Can't get the SFL or X-Mag. Only 50 SFLs were made. X-Mag is on backorder for QUITE a long time. Micro-E is through Pro Team Products. Check them out.
2) They are 5 pounds. Make sure you use an aluminum barrel & fibre tank to cut the weight. You can also get a ULE rail (which is a milled/lightened body rail)
3) http://store.airgun.com
4) Revvy or Halo-B will work fine
5) I have a shocktech full drop. Works fine for me.
Originally posted by Intelliphreak -
AGD has also made the no-rise body for emags/rt pros.
it's really short compared to the high-rise, hence the name.
unfortunately they're out of stock
Comment
-
Originally posted by Schnitzel
AGD has also made theno-rise body for emags/rt pros.
it's very short compared to the high-rise, hence the name.`Intelli+Comment
-
if you are running an EvoII or HALO B, this works better than a high rise...they work better with smaller ball stacks than with a long ball stack
Comment
- AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026. Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
Comment