**RT gun not working ***help***

[ciscokid]

Let a buddy shoot my gun; but befor i can tell him to hold the trigger down while its gassing he gassed it up! and the valve stays in the forward position and leaks air---well ive tried sticking my squeggee down the vale and holding it down but it didnt work--it still leaks out the front when i gas up--i took it apart to see,but it looks fine--what else can i do ??????

some one Help!!

cisco

[anthraxxx]

egads, well i have never heard of not holding the trigger down causing leaking down the barrel, i know some people who do that all the time and it doesn't happen to them. anyway i would check or change your power tube oring and if it still leaks then go to the next size down spacer. it sounds like the oring though. if after changing the oring and going to the smallest spacer it still leaks, check your sear and bolt for excessive wear. you'll have to get new ones if it is those.

good luck

[digitard]

Its most likely an Oring, maybe just the way he gassed it up was the last straw for it ...

Go pick up a Mag parts kit and just replace the orings one by one (look for any that look a lil warn) .....

Sincerely,
Dave K