a.n.s phase 2 valve need help

[creepunx77]

this is my first post on this forum and i'd greatly appreciate some help. i have a 68 classic mag with a ans phase 2 valve. when i first put it on my gun shot fine but when i turned my velocity down it leaks right out of the back and i really need some help

[ffcocker]

just why?

y did u buy that in the first place
put your stock back on the ans phase 2 valve does nothing and agd won't honor the warranty with it on

[creepunx77]

i assembled the gun just from aftermarket parts and i needed a valve so my friend gave me his old one. which worked fine for about a month and now it just leaks out

[Nobody077]

First off welcome to the forum
OK first suggestion is throw the ANS in the trash and find a new AGD valve half, the aftermakret valve halfs dont help, they just cause more problems, but since you said it came from a friend I wont give you iny more crap about it. My second suggestion is get a MAG parts kit and replace all the o-rings,clean the valve, and make shure you oil it when you put it back together. Hope this helps if not see first suggestion.

[creepunx77]

Thanks for the tip 'go down to the proshop and get a parts kit. if that doesnt work I should go buy an agd back valve? Thanks for your help

[Kevmaster]

yeh. get rid of the ANS valve. its nothing but problems. As for the valve assy back, try and get one here. AO or AGD will sell you one, you might get lucky and find a new valve back. if not, its gunna be tough. after replacing all the parts in there, it may just be cheaper and better (well, ok, so new parts would still cost less--but better) to just but a X Valve with the Level 10 bolt

[creepunx77]

so is the x valve compatible with a 68 classic mag?

[Nobody077]

Yes the X-valve is compatable with all AGD guns except the old automag RT, so it would be a great(best)upgrade you could do on you gun

[creepunx77]

Thanks a bunch how much would one run for?

[ffcocker]

price

325 i believe which is great deal considering it comes with lvl 10

[Kevmaster]

if you trade in your current valve, its only $225

[creepunx77]

hey kevmaster i thought thats only with the stock valve correct me if im wrong

[Kevmaster]

yes, indeed. my mistake. you would have to find a stock valve back and assy for it...

[QUINCYMASSGUY]

hey creepunx77, if you're looking for a valve I might be able to help. Look on Ebay for a Level 10'd Minimag valve being sold by me, Quincymassguy. I have the level 10 already installed and you'd be able to get it set up in like new condition for $180 with all original parts included as well. It has 4 stars on it so you get 4 returns to AGD for free. I'm selling it only because I want to invest in an Xvalve which would cost you $325 right now. It would help us both out and you'll have a hard time finding half a valve anywhere. If you are starting off, it is the best way to go as you will never outrun its shooting rate and the Level 10 NEVER breaks balls. And yes, ANS valves are worthless, no aftermarket company makes better Mag parts than AGD does. They always stand for quality and useful products, which is why they never tried to sell a multi-hole valve or another worthless product idea like that. Anything they make is quality and a legit upgrade.