Shooting problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • HailMatt
    Registered User
    • Dec 2002
    • 2

    #1

    Shooting problems

    I had my lvl 10 installed by a friend that works at a field. The bolt doesnt leak, but every time i try to shooting fast, it vents air on the second shot. If i try to shoot 2 balls really fast, the first one will fire, but on the 2nd all it does is vent air. And after i shoot one ball, teh velocity starts to drop. Im using my old spring, and i havent chronographed it so im not sure what my velocity levels are. My tank compressed air tank was also low on air, and ran out after about 30-35 shots. I hope thats enough information for you to figure out what might be wrong.
  • toymyster
    Team OSIRIS
    • Dec 2000
    • 1277

    #2
    First, welcome to AO!! Why don't you try out your setup with a full tank!! If you were almost out of air, the valve might have simply ran out of gas!! Fill your tank, test out your system, and if you still have problems, we'll take it from there!!
    E-Mag's on a diet
    Stay tuned for Pics!!!
    Centerflag 201 series 68/45

    Comment

    • kevmaster
      Owners Group Div: Director
      • Oct 2001
      • 5475

      #3
      i learned this at PTI, and although it seems obvious: "NEVER try and tech a paintball gun without full power sources: both air and battery(if applicable)."

      So, get your air filled and then see if there are problems

      Comment

      Working...