I'm have a problem with my RT Pro when I gas it up. It pisses air immediately out the barrel. Now would the sear be sticking or would this be a possible fried o-ring? Or could it be something else?
-
Moderate with Equality & Consistency in 2005!
AO-WI: Player's List - Now with over 100 People!!!
Karta #082
Member #007 of the Unoffical Trina Fan Club
Great Traders: automagfreek, ClassicMagger, Emagster, fire1811, Kevmaster, MrMag, Nicad, oldsoldier, RogueFactor, SpongeBobSquarePantsx2 , SteveDx10+, The Frymarker, Treefall25, Tunamanx3, warpfeedmod
In Loving Memory of Eric "Po" Ison Oct. 10, 1974 - Dec. 31, 2004 -
Check the Orings. Otherwise, it could be the spacer is wrong. Those are my first ideas. Let us know if that works. -
Push and hold the bolt back with a straight shot squeggee while you gas up the gun. You need to give it a quick burst of air to seal the valve. Oiling the valve does help relieve this problem.Comment
-
you also should hold the trigger down as you gas up. this will identify a leak in the on-off orings if the gas leaks out the barrel. then once the gas is on, release the trigger and you should be set....
Comment
-
I figured out what it was, it was the power tube o-ring. Thanks guys.
Moderate with Equality & Consistency in 2005!
AO-WI: Player's List - Now with over 100 People!!!
Karta #082
Member #007 of the Unoffical Trina Fan Club
Great Traders: automagfreek, ClassicMagger, Emagster, fire1811, Kevmaster, MrMag, Nicad, oldsoldier, RogueFactor, SpongeBobSquarePantsx2 , SteveDx10+, The Frymarker, Treefall25, Tunamanx3, warpfeedmod
In Loving Memory of Eric "Po" Ison Oct. 10, 1974 - Dec. 31, 2004Comment
Comment