MiniMag - inconsistant velocity

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Devious22
    Registered User
    • Oct 2001
    • 5
    #1

    MiniMag - inconsistant velocity

    Hey guys, Im having a little problem with my mag. I have very inconsistant velocity. When I go to crono, I will shoot at like 252 fps, then next shot will be like 190fps, and so on.... I cant keep the velocity constant. Here is a list of my modded internals. I have,

    cyclone valve
    ANS Phase 2
    AND bolt

    I changed all the seals in the valve assembly, and cleaned/re greased the piston. I dont konw what else it could be. The nitrogen system I have is an Air America Raptor. Should I try to play with that a little, or do I need a diff piston on my mag. Any Ideas???

    Thanks

    Anthony
    Tags: None
    • kickass68mag
      Team Lethal Injection
      • May 2001
      • 780
      #2
      get rid of the valve

      get rid of that crap valve and you should see some difference, i did when i got rid of mine !
      AO member # 949

      Email me at [email protected]

      I am usually on AIM, just im me

      Yzz89
      Droptop71olds
      ----------------------------
      Team Lethal Injection
      Support our team wear our paint

        Comment

        • Devious22
          Registered User
          • Oct 2001
          • 5
          #3
          do you mean the cyclone valve, inside the on/off valve???
          or the ANS phase 2 valve???

          Thanks for the reply..

          Anthony

            Comment

            • xmetal2001
              Junior Member at heart
              • May 2001
              • 1994
              #4
              Put ALL of the stock AGD parts back in...Aftermarket valve parts just wear down quicker and cause problems

                Comment

                • Devious22
                  Registered User
                  • Oct 2001
                  • 5
                  #5
                  Ok, if I put all of the stock AGD parts back in, how many ball per second do you think I will be able to shoot without worrying about drop-off?? Also, should I change back to my stock bolt?

                  Thanks again

                  Anthony

                    Comment

                    • Chef123161
                      Registered User
                      • Jan 2001
                      • 374
                      #6
                      Drop off....

                      I believe the stock A.I.R. valve can do 11-13 bps without shootdown. There was a video of a stock automag classic shooting 16bps on a modified hyperframe with the HALO loader and you couldnt even see any drop off. Do a search and im sure you can find it.

                        Comment

                        • Cha0tic
                          g0t mag?
                          • Feb 2001
                          • 1990
                          #7
                          ok, you really shouldn't mod the internals of your mag. this includes the different valves made by ANS. but using these won't neccessarily hurt you, it is just that they don't help at all.

                          i would check your reg. seat. if it is dirty and scrathed, you will have inconsistant velocity. you might be better off just replacing it. Make sure you are running 800-850psi in to your gun.

                            Comment

                            • alf
                              Owner of the RFH Emag
                              • Jun 2001
                              • 1141
                              #8
                              i agree with chaotic

                              check the reg seat...there is a classic post here about what a good reg seat should look like...same thing happened to me, i replaced the reg seat...no more problems

                              -alf

                                Comment

                                Previous template Next
                                Working...