Problem, Nothing I cant live with, justa bit annoying

[TastePAINt88]

My velocity screw backs out, not quickly, but over 2 nights itll go from 260 to not working because the screw backed out too much, this may become a problem only if it starts to back out quickly(260 start of the game, not working mid through, or dramatic drop between the game). Im juts wondering is there a way to keep it locked in without locktite.
No i havent taken it out all the way and wiped the grease off, anything else that might affect it?

[virus]

your best bet would be to get one of them there velocity locks.... they look like a little ring with some tiny set screws.... one of them should be just what you need

[Kevmaster]

also, a little dab or two of 242(usually BLUE) loctite wouldnt hurt it. it would secure things in their place

[Jaymz]

maybe the threads are damaged, you could try a new one.

[TastePAINt88]

A velocity lock sounds like a good idea, if for some reason it doesnt work, ill use a SMALL amount of locktite, Ill check the threads tonight, if they are damaged, Ill gte a new one al together and then go from there, Thanks guys, Its just a bit annoying to do it over everyday day. Any one else experiance anything else like this? Know where I can get a velocity lock?

[toymyster]

If you have a classic valve, you can get a tourney lock available at just about any paintball store!! If you have a Retro or RT valve, there is an o-ring that goes around the velosity adjuster, and if that's worn out, it could cause the problem you are talking about, and it will need replacement!!

[Zenwood]

I've got one.

Originally posted by TastePAINt88
Know where I can get a velocity lock?

If you don't find it locally I have one I can sell you. PM me if you're interested.

[TastePAINt88]

Ok, Zenwood Ill be sure to contact you if i cant find one locally. I have a classi valve, Ill chekc local stores, I just got Level 10 10 minutes ago, Im so happy and cant wait!