umm...retro issue...shooting hot etc

[hostage]

Okay i put together a retro valve and i put all the needed parts in it, one issue is it seems to be shooting hot. It will shoot ~365 consistently though it seems to trail off after that. I just put a new reg seat and reg assemble in and it shoots really loud and hot and the pull is very hard. Any suggestions would be helpful.
-Doron

[rikkter]

whats your input pressure from the tank at?
and not saying you are dumb or anything, but have you treid lowering the velocity?

[hostage]

if it is in all the way our out all the way it shoots 365 no matter what. adjustable tank tried it with a preset 800 and i used an adjustable later. I think it is something that is keeping the veloicty from being adjusted. It is like it is jammed, it is consistent when i fire, though it starts to shoot down to the enormouspressure.
-Doron

[rikkter]

degass it, unscrew velocity nut, tak eout the spring pack, and look for any dmaages or anything flawing out, grease it if you can, then clean the pistion it that, change oring if you can. back together and try

just redo your reg section of the gun and see if that works