Lvl 10

[Doc_Shock]

I recieved my level ten not too long ago and after installation of the 2.0 with 2 shims and 40 shots later it satrted to leak. I went to the smaller carriers 1.5 and 2 shims, no leaking whatso ever in fact it shoots great, heres the problem, the bolt stop when something like asqueegee is placed near it but the bolt is still comming out with enough force to break paint, what can i do to prevent this, My setup is as follows 1.5, 3 shims and the spring that i think is the middle one.....

[Brian68mag]

try the longer spring or turn down your velocity, im sure others will have other and probably better suggestions.