help..screw wont come out!!!

[Automagger44]

i need to take my gun apart but i stripped the thread on my screw..i dont know how to get it out now cuz an allen wrench wont take it out...plz help me for i am playing pball again tomorrow!!

[Dayspring]

Well, we need a little more information than what you're giving us. There are a few "screws" on the Mag. Which one did you messs up?

[Automagger44]

ggg

the screw thats right in front of the trigger

[Automagger44]

ummm....whats a hacksaw??lol

[paintballbeaver]

I've seen this prob plenty of times friends mags peoples at fields so i have devised a mostly easy way yo do this take a set of vise grips preferably needle nose, robo grips or a small set of slip joint pliers work well to.

now place your gun in a vise if you have one or have some one hold onto it all you want to do is allow the pliers to wrap around it and you should be able to twist it out

there is another way to and that is to If you have the standard frame or a single benchmark youve lucked out because what you do is a stanard household drill either corded or cordless both work fine and you pick a drill bit to drill off the top of the head and then you can use a pair of pliers or vise grips to remove teh screw


the last option it to find a hack saw now this is inmportant it must have a removable blade that is key
first remove the blade then slide the blade inside the trigger frame with the teeth down then reatacth the blade and then use it to make a slot in the top of teh allen screw make sure not to hit the frame then simply use a screwdriver to pull it out

or your other alternative is send it to me and i can remove it replace the screw and give you a correct allen key all you have to do is mpay for shipping and a screw

[Automagger44]

thx...

thx for ylls help..but i found a way..i just use a different kind of allen wrnch and it works!! thx for th hlp so nxt tim i know what to do !!

[rikkter]

lol. maybe next time be more SPEEECCIFFFICC
i thought the threads were stripped not the hex slot in it, sometimes you can put a think piece of paper oor something and just push it in there with the alan key and then it will coat the inside of it or should, and it should work, if not then try what you said.