Level 10 and RT Questions

[Grayso]

I was just wondering if it would be ok to use C02 with the Level 10 bolt or the RT Valve, and if an expansion chamber or regulator would help it any. Also, if I shouldn't run use them with CO2, what would be some good upgrades to get the same effect, from my mag?

[Bulldog]

If your using a RT Valve, DO NOT use C02. A good adjustable n2 tank, level 10, and an I frame would be a good direction.

[toymyster]

Do NOT use Co2 on your RT valve, they are designed to run on CA or Nitrogen ONLY!!!! Bulldog said it and I can't stress it enough!!!

[Kevmaster]

I wouldnt recommend doing it. The RT valve is DESIGNED for N2/HPA and should only be used with N2...a good adjustable tank works best(but costs $200-500) but a preset system will work fine($75-250)

[magnj]

i was just reading on obdo.net how you CAN use C02 on al guns if properly set up. That said dont do it. Its too risky. You can use LX with C02 but I hear it acts funky

[Kevmaster]

It is POSSIBLE to run a RT on CO2, if you get ALL liquid(i mean, anti siphon, x chamber and a pps reg) out, replace the orings with ones that accept Co2 and then it will function on CO2. however, it will have very erratic velocity...like one at 225 another at 350....