Classic Mag won't fire

[jocull]

First off my mag shot fine 2 weeks ago and now I don't know what's up. When I try to fire it the first shot works fine. Then the trigger won't come all the way back out and the bolt appears to stick and the gun leaks air until I fiddle with the trigger and it pops back out. I have taken the gun down to nuts and bolts and oiled everything real good but nothing seems to work. I have ordered an AGD repair kit and hopefully that will do the tick. Any advice at all would help greatly

[BlackVCG]

Replacing the powertube spacer with the next larger size should do the trick. The problem is bolt stick and if you're able to recock the gun by pushing back on the bolt with something, then it's a PT spacer problem. Get a PT spacer kit and replace the existing PT spacer (or spring) with the next size up. If it's a spring, start out with a .225 spacer.

[jocull]

The bolt re-cocks itself eventually after I mess with the trigger a little bit. Either that or it just re-cocks itself.

[Bartleby]

i had a very similar problem with my gun a few weeks ago. try takin a look at the bolt itself. sometimes the bolt can make the gun stop firing entirely untill you fiddle with it like you said, and it recocks itself. if you haven't called agd yet, do so. they'll hook you up real nice.