help with raptor

[WicKeD_WaYz]

alright so im going paintballing with my gf this weekend so Im diggin through my stuff looking for a mask for her. I found an old raptor that i dont even remember owning. I figure ill let her use that one instead of my old cocker

n e ways...when i plug in the co2 it runs staight through the gun and right out the barrel. I took it apart and the pin valve is fine. i cant find anything wrong with it. All i kno is it dumps co2 out the barrel. Im not familiar with these type of guns can someone help me out???

[ChucktheMAGician]

Sounds like a bad cup seal.

[mr_cool2588]

Two possible problems:

1)More than likely, the cup seal

2)Another possibility is the steel pin at the back of the spring. It is possible, believe it or not for this pin to break or even shatter(thats Brass Eagle for you) any way this happend on mine before I got my RT.

This is usually caused by the weakening of the velocity spring, once it becomes weak enough to let the bolt be blown back into this pin it is not long befor it breaks.

hope this helps and good luck, but what kind of guy makes his girl play with a raptor.

[xen_100]

also, make sure you cock it before you put a tank on it.

[WicKeD_WaYz]

Originally posted by mr_cool2588
hope this helps and good luck, but what kind of guy makes his girl play with a raptor.

shes not the smartest girl around and when dry firing in my garage she couldnt pick up the concept of pulling the trigger all the way back...we had to clean more than shoot. ide rather not spend my day squeegeeing her barrel

hmmm now is when we decide if the girlfriend is worthy enough to play with the emag.....

thanks though looks like ill need a new cup seal