Questions about buying a used E-Mag

[robscomputer]

Hi,

I buy a used E-Mag from eBay and while I'm waiting for the marker to be delivered there was a few questions. First, since this is a used electronic marker is there any know problems with the marker? I used to have a LCD Angel and remember the circuit board, battery issues with these markers. Any major wear points of the marker, should I look for any signs of abuse on the sear, bolt?

Thanks,
Rob

[digitard]

Just make sure that none of the internal wires seem to be loose from the circuit board and you should be fine.

Sincerely,
Dave K

[TheTramp]

That's one of the great things about Mags. If I had to pick one gun to get used, it would be a Mag. Generaly the only thing that you might have to do is replace a few o-rings. With the E-Mag, you should also check the electrical conections as well (like digitard said). Other than that, there shouldn't be any problem.

There might be a chance that the previous owner changed a few things from stock, caused himself problems, and sold the gun because "it never worked right." Just make sure everything is in the stock configuration and it should shoot great.

[robscomputer]

Thanks!

The seller has the level 10 kit installed and says there is no problems, just switching to another marker. Is there a diagram of the internal wires or would this be in the owner's manual?

Thanks
Rob

[Dayspring]

Really, there are only two sets of wires to worry about. The HES and the ground/power wire. And you can see them both clearly when you open the grip frame & take the grip off the body rail.