Retro Valve is screwed up!!! help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • blackmag
    Registered User
    • May 2001
    • 190

    #1

    Retro Valve is screwed up!!! help

    OK i have play paintball with my gun for about 2 months but i played this last saturday. When i gased up my gun i started the Rt chrony steps you know shoot then hold the trigger back then quickly shoot again..but when i was holding the trigger back it made this noise "sput,sput" and i look at the bolt and it was moving back and forward loading a ball everytime it when "sput".that wasnt the biggest problem.now matter what i set my tank at 700psi-800psi after shooting my gun it started leaking out the back..also it leaked down the barrel please help me i have to have my gun working in about 2 weeks so i can play again...
  • a_malfunction
    Damnit! It Malfunctioned!
    • Feb 2001
    • 1779

    #2
    The "sput" noise might be the on/off. Check your on/off orings. Leaking down the barrel could be either the powertube oring or the spacer. And leaking out of the back is usually due to your velocity being set too high. Im not sure about the on/off..... you'll need someone else to verify that.
    -Gig 'Em Ags!

    Comment

    • a_malfunction
      Damnit! It Malfunctioned!
      • Feb 2001
      • 1779

      #3
      Oh, and make sure its well-lubed.
      -Gig 'Em Ags!

      Comment

      Working...