how long exactly is the minimag without the barrel from the front to the back of the regulator? also are there any 15* ASA's for the mag so that the front grip angles forward. that would rid of the drop forward probelm
-
-
a stock minimag is about 11" from the back of the valve to the front of the minimag 'vents' (the mainbody is about 9 1/4")
A ReTro Valve will add about an inch to the overall length, give or take a little.
hope this helps. -
-
another question how far in does the barrel go to approx. on a minimag. im just trying to get a feel for how it will be but it's kinda hard with a black dragun to measure. i figured though with the bd's bolt pulled back w/out the barrel it's about the same length as the minimag. but i just want to know how the barrel attaches. i'm thinking it goes back to the power feed.
Also Xzion what kind of barrel is that on your minimag?Last edited by danheneise; 01-24-2003, 07:37 PM.Comment
-
someone was going to make 15* ASAs. Joker, maybe?Comment
Comment