Emag + Barrel issue

[digitard]

Hey,
I'm having an issue here ... My Boomstick barrel isn't locking into my EMAG ... Its a Hopper Left/Right barrel and it will load for "hopper left" bodies fine and twist in ...

But if I try to twist it into hopper right (cause I just switched to a warp body) it wont go all the way through.

Do I need to nick it down a bit w/ a dremel or what?

Sincerely,
Dave K

[darklord]

I had the exact same problem with my e-mag. The way I see it, there are two options (haven't tried either cause I bailed on the boom and got a 2 piece J&J):

1) Take off the body rail and loosen the set screw in the twist/lock assembly
2) Buy a new barrel.

[MaxxFactor]

I had the same problem with my Dye Boomstick. Use the Dremel or a file and widen the channel. That's what my local airsmith did. Works like a charm now. Loosening the set screw won't solve the problem.

Good luck.

[digitard]

Thats what I thought, I'm gonna call a few stores today and see what I can come up with.

Thanks!

Sincerely,
Dave K