I just bought a used Emag, I don't really know anything about them. I was wonder if some one could explain or give me a link on how to adjust the trigger pull length and how light it is.
-
-
Watch the video...
It should explain the magnet system and how the trigger is adjusted. -
There are 3 ways to adjust the pull.(great wide range for anyone to be happy with a stock Emag :))
pull length is adjusted with a allen wrench through the selector switch in Emode.(take off the rail and you'll see it)(also, leave a BIT of overplay where the hall effects sensor picks up the magnet so the pull is reliable. you could still get it down to almost nothing down worry)
The return is adjusted by adding or removing magnets from on top of the trigger(in the grip frame). If you want a lighter than 1 magnet pull, you can add a o'ring as a spacer.
Finally, You can adjust the point where the Hall effects sensor picks up the trigger magnet with an allen wrench(in front of the trigger hump)(dont over do this one or the magnet will pop out and you'll lose it!)Comment
-
Thanks.Comment
Comment