Flatline Issues
I am trying to get my RT minimag to be more consistant and I am considering either a flatline system or a side line palmer stabilizer. I am leaning towards the flatline because I would like 4500psi, but I dont want to replace my drop forward. I have an NW drop with on/off which has the same bolt pattern as the agd trigger frame bottom. will I have to replace my drop, or will the flatline just replace the on/off? if not, is there an adapter? Is the flatline even worth the few extra hundred i would pay over the palmer? thanks for any help!
-
-
Consistency is all based on the valve of the gun. You need to make sure the reg. seat is clean and oiled. It's the o-ring that's under the brass piece inbetween the two valve halves.
The Palmers reg. will only be a redundant regulator and starve the system.
The Flatline is a good system for lightweight and adjustable output, which allows you to tweak the trigger feel on your RT valve. For some it's not worth it, for others it is. Just depends on what you want. I would not recommend getting a secondary regulator like the Palmers.
Comment