micro body help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bigdawg_69
    Registered User
    • Sep 2002
    • 138
    #1

    micro body help

    i have a rtp mag right now. it has a 68 valve w/ lx, i frame. im lookin at buyin a micro mag body. i dont knoe much about micros but since i already own a cocker and the cocker freak set i thought it would be a wise move to get a micro body. question is would my i frame fit the micro and will my valve fit in the body. thanx for ur help also when conveting my rtp over do i need a diff sear for the micro body.

    later
    There will always be idiots on the planet................... it makes us smart people stand out

    good traders- - dicksondood23, paintballer 187, Aegis, Aut911

    my feed back - http://www.automags.org/forums/showthread.php?s=&threadid=79821

    email / msn [email protected]
    Tags: None
    • Kevmaster
      Owners Group Div: Director
      • Oct 2001
      • 5475
      #2
      1)

      You will ditch the current body AND rail that you have and put the micro body on there.

      2)

      yes, a IFrame will fit the MicroMag body

      3)

      yes, the current valve you have and the sear will both work in there fine with hte possible exception of the on-off pin. Someone here can tell you for sure as can PTP, but i BELIEVE the PTP on-off pins are shorter than the AGD

        Comment

        • Bulldog
          Registered User
          • Jun 2001
          • 1374
          #3
          Ya everything he said, PTP on/off pins are shorter. You can call PTP up and have one shipped to you for like 14 bux. Also, if your I frame has a straight trigger guard, you may want to look into getting one with a hump, if your gonna use a foregrip.

            Comment

            Previous template Next
            Working...