No-Rise HALO B problems

[Top Secret]

I switched from my HALO B or Revy/WARP to the No-Rise from AGD. I found that for some reason I tend to get many more breaks with the no-rise. My Emag is LX equipped. Before I was so confident in my warped gun(pre/post LX included), that I never even carried a squeegee on the field. Could the HALO be causing addtional pressure on the balls to make them more fragile? I'm not having chopping issues and I'm shooting the same RPS Prems that I've been shooting for some time. It seems to break alot less with my Revy on top.

This normally only happens around 13-16bps strings.

[BlackVCG]

Put a little bit of grease on the drive belt for your HALO.

[Top Secret]

I did oil the belt the last time I played with PMI gun oil. Seemed to improve things a bit, but it's still shotgunning paint on me.

[sneakyhacker420]

re-adjust your level 10, mine started chopping and the o-rings has broken in and i was able to move up to the next size spring, which is usually lighter on paint

also, halo's have been infamous for not liking PMI's Advantage shell very much... or maybe that's just the A's, i'm just not completely sure at the momeny :o

[Top Secret]

Just reinstalled my trusty old Warp back on for the time being. Ran a 170 round string of Bigball through with no issues. I still would like to fix this. My field is getting Diablo soon, but PMI paint is rather rampant around here.

[Top Secret]

BTT. I wanna use my No-Rise again.

[Koosh]

How are the ball detente's? I know my Halo-A would double feed occasionally causing a gooey mess that looked alot like a chop... Just something that could be a cheap fix...

[sneakyhacker420]

bend in your nubbin(s) a bit further if its double feeding

[joeyjoe367]

What's the weather like? Colder? That could also make your paint more brittle... it might not be your HALO. Move up a spring size if possible.