Its a BE VL 9v. It has the Intellifeed system on it. Should I get an X board and new impellers? Or will the intellifeed be good enough? I don't shoot fast btw.
Jim
Jim
-
-
If you are'nt having issues with it then I would'nt worry about it. If you think it'll help I have a 4 blade prop I'll send you for your 9 volt. It's just laying here. -
HEY,
I would like the 4 blade prop if you wouldn't mind. I also have a 9 volt hopper with no intellifeed. And I shoot fast with my intelliframe. That would be great if you could send it for FREE. PLEASSEE. I'm a teenager with no money!Germany's Most Wanted Balla is sponsored by:
NXe Paintball
Maxs Sport
Tomahawk PaintballsComment
-
Hey I used to live by decatur, Al. I lived in Huntsville. Pretty pimp place.Germany's Most Wanted Balla is sponsored by:
NXe Paintball
Maxs Sport
Tomahawk PaintballsComment
-
And now you live in Germany? Big hop. How much is shipping going to be for this free part?Comment
-
heres what i did with my 9 volt rev and it seems to be working out ok. i took a soldering iron and removed the jumper bridging the battery terminals(the board is set for two batteries, for the 9 they just jump one set of contacts)i then got two more battery contacts and slid them on and i put on a 4 blade prop. i now have an 18 volt rev. not sure it responds as well as an x board but it spins faster.battery life has not been an issue as of yet. total cost was a few dollars for the prop. try at your own risk.Comment
Comment